|
Electrically Operated Platform Truck SPECIFICATIONS CHASSISFabricated from rolled Channels and Plates. DRIVE AND TRANSMISSION Traction motor is mounted above the drive wheel drive to the whel is transmitted throgh gear & pinion. The entire unit swivels on heavy duty self aligning bearings. ELECTRICAL SYSTEMState of the art solid state electronic control provides stepless smoth acceleration with high speeds for better work, output. The design permits fast acceleration which enables the truck to give more work output per hour. BRAKEThe Brake comprises of two internal expanding shoes mounted on rear axle, with Parking Brake facility. SUSPENSION TYPE - SPRING SHOCK ABSORVER SYSTEM The Chassis rests on a Spring Shock Absorver System for lesser load shocks to be transmitted to the drive as well as on the load carried. CONTROLThe hand brake is positioned by the left hand. The accelerator and brake pedals are conveniently positioned for foot operation SPECIAL FEATURES * Electronic Controls.
* Low voltage protection of battery.
* High power traction motor.
* Fast acceleration.
* Large size wheels. OPTIONAL FEATURES * Front and Rear light.
* Battery condition meter.
* Hour meter. Truck Data 
| |
Capacity (Uniformly distributed) |
2000 Kg. |
| A1 |
Platform length |
1525mm. |
| A2 |
Platform width |
1100mm. |
| H2 |
Platform height |
650mm. |
| H1 |
Overall height |
1250mm. |
| A3 |
Overall length |
2925mm. |
| B1 |
Wheel base |
1980mm. |
| |
Wheel track |
870mm. |
| |
Tyre : - Cushion Solid Rubber |
| |
Front Wheel (1 No.) |
Ø460 x 125mm. |
| |
Rear Wheel (2 Nos.) |
Ø460 x 125mm. |
| B2 |
Rear overhang |
580mm. |
| B3 |
Front overhang |
365mm. |
| |
Travel speed - unladen |
7 to 9 kph. |
| |
Travel speed - laden |
5 to 8 kph. |
| |
Gradeability - unladen |
1 : 10 |
| |
Gradeability - laden |
1 : 15 |
| C1 |
Turning radius |
2400mm. |
| |
Battery Voltage |
36 Volts. |
| |
Capacity at 5 Hr. rate |
290A.H. |
| |
Mass of Truck (With Battery) |
1650 kg. |
| |
Platform Type |
Chequered |
|
All dimensions and performance data given in this leaflet may vary by ±12% due to manufacturing tolerances. Performance may also be affected by operating conditions, the inclusion of ancillary equipment, and alternative specification variations. The manufacturer reserve the right to alter specifications without notice.
|
|
